Configure an Eye-Fi Pro X2

If you have a Wi-Fi network within range of your Time Lapse Package, the Eye-Fi Pro X2 card can be used to upload images over the network.

Configure Eye-Fi Pro X2

  1. Plug the Eye-Fi card into your SD card reader (or use the included one).
  2. Navigate to its folder on your computer and open the START HERE folder.
  3. Install the Windows or OS X software in this folder and follow the on-screen instructions.
  4. Enable Relayed Transfer.
  5. Enable Endless Memory.

For more information, consult the Eye-Fi Pro X2 support site.

Configure Canon EOS camera

  1. Press Menu button.
  2. Go to first wrench/spanner menu tab.
  3. Select "Eye-Fi Settings" at the bottom of the list.
  4. Select "Eye-Fi trans." and choose "Enable."

Configure Harbortronics DigiSnap 2700

If you are using the Power to Camera feature, ensure you leave the camera powered long enough to upload images over your network. The default setting of "restart daily" will work fine.

Network Photo Transfer with a Harbortronics Time Lapse Package article (PDF)